void __5_5_2__0x1F0001_16_SGMII_Status_Register() {
/**
 * @header:     	5.5.2 SGMII STATUS REGISTER
 * @address:    	0x1F0001 | Size: 16 bits
 * @port:
 * @phy_register:
 * @mmd_register:
 * @description:	These bits only indicate that this device is communicating with a link partner. For auto-negotiation results, such as the
 *					link status of the connected PHY, refer to the SGMII Auto-Negotiation Status Register.
 *
 * @note:
 *
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | Bits  | Description                                                                        | Type      | Default              |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 15:6  | RESERVED                                                                           | RO        | 0000000110b          |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 5     | Auto-Negotiation Completed                                                         | RO        | 0b                   |
 * |       | Indicates that “acknowledge” auto-negotiation codewords have been                  |           |                      |
 * |       | exchanged with the link partner. When this bit is set to 1, the contents of        |           |                      |
 * |       | register 0x1F0005 SGMII Auto-Negotiation Link Partner Base Ability                 |           |                      |
 * |       | Register and the SGMII Auto-Negotiation Status Register are valid for              |           |                      |
 * |       | SerDes mode and SGMII mode, respectively.                                          |           |                      |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 4     | Remote Fault                                                                       | RO/LH     | 0b                   |
 * |       | When set to 1, this bit indicates that the receive link of the link partner is     |           |                      |
 * |       | down. This bit is based on the auto-negotiated information from the link           |           |                      |
 * |       | partner. This bit is applicable only to SerDes mode, not SGMII mode.               |           |                      |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 3     | RESERVED                                                                           | RO        | 1b                   |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 2     | Link Status                                                                        | RO/LL     | 0b                   |
 * |       | Indicates that the RX link is up, without regard for auto-negotiation. If the link |           |                      |
 * |       | goes down, it is latched low until the host reads this register.                   |           |                      |
 * |       | 0 = RX link down occurred since last register read.                                |           |                      |
 * |       | 1 = RX link is up.                                                                 |           |                      |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 * | 1:0   | RESERVED                                                                           | RO        | 01b                  |
 * +-------+------------------------------------------------------------------------------------+-----------+----------------------+
 *
 */
}